LUISO® W71

LUISO® W71

for Brazing & Induction Hardening

  • without solvents

  • environment friendly and fragrance-free

  • viscosity and course may be adjusted by water

  • drying time appr. 30 minutes only

  • good protection properties

  • residues can be removed by water

 


Properties:

LUISO W71 is a all purpose stop-off compound for all brazing applications. It will be applied as a thin, continuous line around critical areas on a metal's surface where brazing filler metals must not be allowed to flow.

 

Application:

Before using, LUISO W71 should be stired up shortly and then applied with a paint brush. One layer is sufficiant. To avoid evaporation the cans should be sealed hermetically after use. To restore normal viscositiy the stop off paint can be diluted by adding up to 2 % water. No special thinners are necessary. The dry off time for LUISO W71 is 30 minutes. After heat treatment LUISO W71 residues may be removed by washing in hot water or with steel-brush.

 

Packing:

LUISO W71 to be delivered in PP-cans of 1, 5 or 10 kg.

 

Storage:

LUISO W71 is sensitive to frost. Storage at room temperature is recommended. Opened cans should be closed after use. Storage time should not exceed 12 months.

 

Free Sample:

Here you can order a free sample -click here-

 

 

 

Contact

DAM Härtetechnik GmbH
Am Bubenpfad 2
D-67065 Ludwigshafen

Phone: +49 (0)621/4549666
Telefax: +49 (0)621/4549667

E-Mail: This email address is being protected from spambots. You need JavaScript enabled to view it.